Articulated Stingray Anti-Stress Toy – Print-in-Place 3D Model

Meet the Articulated Stingray, a fun and expressive print-in-place 3D printable toy with a flexible segmented body and a charming, playful design.
The model is designed to print fully assembled, with no supports or manual assembly required after printing. Thanks to its articulated construction, the stingray can move and flex right off the build plate.
Features
– Print-in-place articulated design
– Flexible segmented body and tail
– No assembly required
– Designed for 4-color AMS printing
– Requires a multi-color system such as Bambu Lab AMS / AMS Lite
– Great as a collectible, desk toy, gift, or fidget toy
– The model shown was printed and tested on a Bambu Lab printer

Print it, flex it, and enjoy your own little stingray!

Printing Tips
For the best results, I recommend the following:
– Enable a brim for all printer types. This helps improve bed adhesion and provides additional stability during the long print.
– If you are using a printer with a moving build plate, such as the Bambu Lab A-series, I recommend reducing nozzle acceleration by approximately 50%. The large articulated surface and many moving segments can otherwise make the model more sensitive to rapid bed movements.
– Make sure your build plate is clean and properly prepared before starting the print.
– Because this is a multi-color model, make sure your AMS system is correctly configured and that all four filament colors are loaded before printing.
Important: This is a 4-color AMS model. A compatible multi-color printing system is required to reproduce the colors shown in the photos.